GMC Terrain Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I had all 4 pistons replaced as well as both camshaft actuator solenoids. I now have the following error when tested:
"cam shaft position control"
Would this be the result of the work done above?
 

·
Premium Member
Joined
·
155 Posts
I would say yes..either there is a calibration step required or a new cam-shaft position sensor is out of tolerance and needing replaced.
 
1 - 2 of 2 Posts
Top